TubToday Acrylic Walk-in Tubs are vacuum formed from a solid, long-lasting acrylic sheet. The non-porous material in white gloss finish is easy to clean and impermeable to mold and mildew. Under the acrylic shell facade is a rust proof, stainless steel frame reinforced with multiple fiberglass mesh and gelcoat layers to ensure the durability of the tub’s structure. The frame has multiple leveling legs that can be adjusted for an easier installation and stronger support.
TubToday’s Lay Down 30” x 60” Walk-In Tubs main feature is the unique tempered glass inward swing door with a brushed finish aluminum frame. The sleek door was designed in the center of the tub, which establishes a vertical tub wall and creates a wider interior floor space opposed to that of a standard curvature wall. This, along with a low step-in threshold and textured floors, may reduce the chances of tripping and slipping when standing in, showering, and entering or exiting the tub. An optional glass shower screen is available to make your tub more shower-like.
The Lay Down 30” x 60” comes with our Single 2” Drain with emergency pull up chain, consisting of two 2” outlets and an overflow. A cap is also included to cover 1 of 2 ports if needed. The 2” drain outlets can be connected to the standard 1 ½” house drain with piping selected by a professional plumber. The selection of drain pipe configuration and the pipes and fittings are up to the homeowner or licensed plumber. However, for the most efficient drainage, please consider connecting both ports to a 2” house drain if possible.
Some may wonder how a Single 2” Drain can drain faster even though it’s connected to a 1 ½” house drain. That’s because as the water drains, air is pushed through the overflow, thus creating a vent system and reducing the amount of air bubbles preventing a free flow of the water. As a result, this produces a faster drain
We provide a limited lifetime warranty, of free replacement parts for the lifetime of the original customer living at the address of installation. This warranty is non-transferable to other customers or locations. Shipping costs and the labor of replacement(s) are not included.
Jetting & Therapy Options
TubToday’s Lay Down 30” x 60” Acrylic Walk-in Bathtub is available with following jetting systems:
- Soaking (no jets)
- Hydrotherapy Massage System
- Air Jet Massage
- Infusion Microbubble Therapy Massage
Hydrotherapy Massage System:
The Hydro Massage System includes: a hydro pump with an in-line water heater, eco-friendly ozone sterilization system, hydro massage intensity dial control, and strategically positioned hydro jet system for targeted and effective massaging.
The in-line water heater helps maintain the water temperature at constant level while bathing, if the water tank can produce enough hot water. It is suggested to upgrade to the largest available 75-gallon water heater to ensure enough hot water. Please consult with a professional contractor to determine if your water tank can provide enough hot water for a walk-in bathtub. Our ozone sterilization system is the most eco-friendly, chemical free disinfectant that can eliminate a wide variety of inorganic, organic, and microbiological bacteria. The sterilization system is especially helpful in eliminating odors and hygienic maintenance. The in-line water heater and ozone sterilization automatically engage when the hydro massage push control is pressed down when turning on your jets. The hydro massage intensity dial control allows you to adjust the strength of the water stream by adding more or less air into the hydro system.
The TubToday 30” x 60” has eight (8) strategically placed hydro jets in order to deliver optimal therapeutic relief. These jets provide relief to your back, hips, thighs, feet and calves.
Air Jet Massage System:
The Air Jet Massage System includes an air pump with a 3-speed variable push control, strategically positioned air jets for optimal therapeutic relief, and an auto-purge to maintain an air system free of any build ups. The Air Massage System’s most popular control system is the on/off push control because the buttons were designed to rise above the deck in order to make it easier to push.
The 30” x 60” has twenty (20) strategically placed air jets that pull in air and blow it into the water to create a gentle, relaxing massage. These fixed flat jets work to provide relief to your back, hips, thighs, foot, and legs.
The Air Jet Massage System also includes an auto-purge feature. This feature engages automatically 20 minutes after the pump has been turned off to purge water out of the air jet lines. The auto-purge will run for 120 seconds to ensure your system is clear and free of moisture and excess water helping to prevent the mildew build up.
Note: This massage is more gentle than a Hydrotherapy Massage.
Infusion™ MicroBubble Therapy:
TubToday Infusion™ MicroBubble Therapy System consists of a single Microbubble jet connected to a hydro pump and Microbubble Tank System. The high-pressure hydro pump, along with the Microbubble tank, breaks down the water molecules into billions of tiny bubbles which are then sent out through the single jet. At the push of an on/off button, this feature can provide a moisturizing, exfoliating therapeutic experience all while detoxifying and relieving skin related issues.
For more information about Infusion™ MicroBubble Therapy, click here.